Deligreen Power Co.,ltd
Make DIY Batteries Easier!
Add to Cart
Car battery charger lithium battery charger introduction
Wide voltage option
Besides 220V,110V fixed input voltage,this S2 car charger is available with wide range of input voltage
| Input voltage range | Input current | Output Rated voltage | Max charging voltage | Max charging current | Power factor | Efficiency |
| AC 90～265V | ≤ 16A | 48V | 58.8V | 45A | ≥0.99 Half load | ≥93% Full load |
| 72v | 99v | 40A | ||||
| 84V | 116V | 40A | ||||
| 96v | 132V | 32A | ||||
| 144V | 198V | 23A | ||||
| 312V | 440V | 10A |
Protection function:
| Protection
| Input over-voltage protection | AC264V |
| Input under-voltage protection | AC90V | |
| Output over-voltage protection | Yes | |
| Output start voltage | 0.3 times rated voltage | |
| Output over-current protection | Yes | |
| Over temperature protection | Power down from 85℃, shut off At 90 ℃ | |
| Short circuit protection | Stop output | |
| Reverse battery protection | Stop output | |
| Ground protection | ≤ 100mΩ | |
| C A N Communication protection | Automatically stop output when CAN communication fails | |
| Power failure protection | Yes |
Safety specifications and others:
| Withstand pressure | Input to output:2000VAC≤ 10mA ,Input to ground:2000VAC≤ 12mA Output to ground:2000VAC≤ 10mA,All are 1 minute |
| Insulation resistance | Input, output, signal end to shell ≥ 10MΩ ,Test voltage 1000VDC |
| Electromagnetic immunity | Satisfy GB/T 18487.3-2001 11.3.1 |
| Electromagnetic disturbance | Satisfy GB/T 18487.3-2001 11.3.2 |
| Harmonic current | Satisfy GB 17625.1-2003 6.7.1.1 |
| Current rise time | ≤ 5S,Overshoot ≤ 5% |
| Off response time | 100% to 10%≤ 50mS,100% to 0%≤ 200mS |
| Protection level | IP66 |
| Vibration resistance | 10－25Hz Amplitude 1.2mm,25－500Hz 30m/s2, each direction 8 hours |
| Noise | ≤ 60dB(Class A) |
| MTBF | 150000H |
| Working environment | Relative temperature 5% -95% without condensation |
| Operating temperature | -20℃ ~ +85℃ |
| Storage temperature | -30℃ ~ +90℃ |
Shape and size
combination of 2 3.3KW battery charger
6.6KW Air cooling
Horizontal mounting size within S2-6.6KW
Connector type
Product appearance
(1) The outer surface should be flat, without obvious defects such as scratches and deformation. The surface coating should be uniform.
(2) The nameplates and signs are firmly installed and the handwriting is clear.
(3) The parts and components shall be fastened and reliable, and shall be free from defects and damages such as rust, burr and cracks.
(4) Each product shall be marked with a product logo, including part number, product trademark, product model, production number, production company name, warning instructions, etc., at obvious locations.
Packaging, transportation and storage
Packaging: Product name, model, specification, name of manufacturer are printed on the label . The box contains the product manual.
Transportation: It is suitable for transportation by car, boat and airplane. It should be protected from sun, moisture and civilized transportation during transportation.
Storage: When the product is not in use, it should be stored in a packing box. It should be kept in a clean, dry and well-ventilated environment at 5 ℃ ～ 40 ℃. Avoid exposure to sunlight, fire and water. The product has a shelf life of 2 years (from the manufacturer,from the date of storage), if the storage time is too long (more than 2 year), it should be tested by professional before use.
What is car battery charger?
How many amps do I need to charge a 12 volt battery?
Most battery manufacturers recommend sizing the charger at about 25% of the battery capacity (ah = amp hour capacity). Thus, a 100 ah 12 volt battery would take about a 25 amp 12 volt charger (or less).
Where is the best car battery charger to buy?
WHY CHOOSE US?
1,One-stop power provider including lithium battery
active balancer, BMS ,charger and other accessories.
2,Russial Poland/USA warehouse ensure quick delivery.
3,Factory direct price and whole life technical support.
4,Reliable warranty
Look for distributors! Make DIY Battery Easier!
FAQ
1. What kind of battery is suitable for this charger LiFePO4 battery and Lead acid battery.